1 1

JD Sound

SHURE PSM300 P3TR112GR WIRELESS IN-EAR PERSONAL MONITOR SYSTEM C/W SE112 EARPHONES

SHURE PSM300 P3TR112GR WIRELESS IN-EAR PERSONAL MONITOR SYSTEM C/W SE112 EARPHONES

SKU: P3TR112GR

$1,420.00
$1,619.00 $1,420.00
Sale Sold out
Taxes included.
Frequency Range

Description

The P3TR112GR is part of the PSM 300 wireless systems family.

PSM®300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts. 
 
Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use MixMode® technology or stereo mode to create a personal mix from two channels of audio.  

Featuring SE112 Sound Isolating™ Earphones, P3TR112GR provides great sound and simple setup for entry-level users.

Includes P3R, P3T, SE112, rackmount and hardware kits, ¼ wave antenna, BNC bulkhead adapter, BNC cable, power supply, 2 AA batteries, zipper bag, and user guide

Available in J10 (584-608 MHz) or L19 (630-654 MHz) frequency ranges. Please specify preference on check out.

Specification

    • RF Output Power: 10 - 30 mW (countryspecific)
    • Operating Distance: Up to 100 m
    • Harmonic distortion: 1.5 % typical
    • Signal-to-noise-ratio: 80 dB (A) typical
    • Listening mode: Mono
    • Compatible Systems per band (up to): 4
    • Transmitter Inputs: 2x XLR/6,3 mm combo, mic/line level
    • Transmitter Outputs: 2x XLR split outputs
    • Wired Bodypack Option: Yes
    • Personal Mix Control: On transmitter
    • Remoteable Transmitter: No
    • Battery Life: Wired: 6 h; Wireless: 4 h
    • Frequency Response: 30 Hz - 12 kHz

 

  • Further technical specifications:

    PSM®200 System

    • RF Carrier Frequency Range: 518­-865 MHz (country dependent)
    • Modulation: FM +/- 35 kHz Deviation (Nominal)
    • Operating Temperature: -7 degrees C to +49 degrees C (+20 degrees F to +120 degrees F) 

    EP2T TransMixer

    • Modulation Limiter: Internal peak limiter (>10:1 hard knee compression)
    • Antenna: 1/4 Wavelength, semi-rigid, PCB Mount
    • Connector Type: XLR/1/4-inch combo
    • Nominal Input Level: 25 dBu @ 1/2 volume (12 o'clock)
    • Maximum Input Level: 5 dBu @ 1/2 volume (12 o'clock)
    • Current: 170 mA maximum
    • Dimensions: 220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
    • Net Weight: 370 g (13 oz.) 

    P2R Receiver

    • RF Sensitivity: 109 dBm typical
    • Squelch Threshold: 102 dBm typical
    • Antenna: Attached Whip
    • Audio Input Connector: Connector Type: 1/4-inch Mono
    • Impedance: 1 megohm
    • Maximum Input Level: LO = +0 dBu; HI = 10 dBu
    • Frequency Response: 30 Hz to 20 kHz (+/ 3 dB); earphone dependent
    • Power Requirements: 9 V alkaline battery, Duracell® type MN1604 recommended
    • Audio Output Connector: 1/8 inch (3.5 mm)
    • Minimum Load Impedance: 8 ohms
    • Net Weight: 100 g (3.52 oz.), less battery
    • Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

     SE112 Earphones

    • Frequency Range: 25Hz – 17.5kHz
    • Sensitivity: 108 dB SPL/mW (@ 1kHz)
    • Impedance: 16 Ohms (@ 1kHz)
    • Input Connector: 3.5mm (1/8”)
    • Colour: Gray 
    • Cable Length: 127 cm (64”)
View full details